PA610 注射成型

发布于2024-01-19 11:34:47 点击：0

产品说明

Zytel® RS 3261THSL BK041A is a renewably sourced polyamide 610 resin containing a minimum of 47% renewably sourced ingredient by weight. It is a black, unreinforced, toughened and heat stabilised resin for injection molding applications.

总体

      材料状态      •Preliminary Data 1                         

      资料2   •Technical Datasheet

      搜索UL黄卡     •DuPont Performance Polymers

              • Zytel® RS

             •北美洲      •南美洲      •中美洲             

      供货地区      •非洲和中东      •欧洲                 

             •拉丁美洲   •亚太地区                 

      性能特点      •可更新资源                           

       RoHS合规性      •联系制造商                           

      外观      •黑色                        

      形式      •颗粒料                           

      加工方法      •注射成型                        

      部件标识代码(ISO 11469) •>PA610-I<                      

      树脂ID (ISO 1043)     •PA610-I                          

      物理性能      干燥      调节后的      单位制   测试方法      

      密度       1.03 --     g/cm3     ISO 1183

      收缩率                         ISO 294-4     

      横向流量: 2.00 mm     1.2   --     %          

      流量: 2.00 mm     1.5   --     %          

      机械性能      干燥      调节后的      单位制   测试方法      

      拉伸模量(23°C) 1500       800  MPa ISO 527-2     

      拉伸应力(屈服, 23°C)      40.0 32.0 MPa ISO 527-2     

      拉伸应变                                  

      屈服, 23°C   5.0   30    %    ISO 527-2     

      断裂, 23°C   35    250  %    ISO 527-2/50 

      断张率(23°C)    65    200  %    ISO 527-2     

      冲击性能      干燥      调节后的      单位制   测试方法      

      简支梁缺口冲击强度(23°C,局部断裂) 70    95    kJ/m2     ISO 179/1eA 

      简支梁缺口冲击强度(23°C)   无断裂   无断裂           ISO 179/1eU 

      悬壁梁缺口冲击强度(23°C,局部断裂) 65    80    kJ/m2     ISO 180/1A   

      热性能   干燥      调节后的      单位制   测试方法      

      热变形温度                               

       0.45 MPa,未退火110  --    °C ISO 75-2/B    

       1.8 MPa,未退火   50.0 --    °C ISO 75-2/A   

      熔融温度4    223  --    °C ISO 11357-3  

      注射             干燥单位制        

      干燥温度              80.0°C               

      干燥时间-热风干燥机             4.0到6.0hr               

      建议的最大水分含量           < 0.10%               

      加工（熔体）温度              250到270°C                  

       Melt Temperature, Optimum - Injection Molding 260°C                  

      模具温度              40.0到80.0°C                

       Mold Temperature, Optimum - Injection Molding       70°C